英文版太阳能热水器仪表,测控仪,太阳能配件出口,经典外贸版

Operating Manual on Solar Water Heater Controller

I. Technical specification
1. Power source:220VAC
2. Temperature:0-99℃
3. Water level:5 shifts
4. Controllable water pump:500W
5. Electric heating tube power:1500/3000W option
6. Residual operating current:10MA/0. 1S
7. Solenoid valve parameter:DC12V, tap water pressure 0. 12-0. 8MPA

II. Major functions
Time demonstration, three-time fixed watering, three-time fixed heating, piping circulation/piping insulation/boosting and watering, constant water column, constant water temperature, water quality setting, and temperature control watering

III. Function description of key
Heat key, long press to set/cancel the constant temperature, short press to manually open/close the valve for starting/ending heating function.
Keep warm key, long press to set/cancel the temperature control watering, when C is flashing it is the temperature control watering, short press to start/close the piping insulation/ piping circulation.
Watering key, long press to set/cancel the constant water volume, short press to manually start/close the watering.
Heat preservation key:short press to manually start/close the heat preservation.

IV. Operating instruction:
After pressing the key once it enters into the first interface
After pressing the key twice it enters into No.1 interface, you may set the time (hour), press Heat key +;Watering key –
After pressing the key for three times it enters into No.3 interface, you may set the time (minute), and the method is same as the above.
After pressing the key for four times it enters into No.4 interface, showing F1 is the first watering, you may set the watering time, press Heat key +;Watering key –
After pressing the key for five times it enters into No.5 interface, you may set the water volume, press Heat key +;Watering key –
After pressing the key for six times it enters into No.6 interface, you may set the first heating time, press Heat key +;Watering key –
After pressing the key for seven times it enters into No.7 interface, you may set the heating temperature, press Heat key +;Watering key –
Exanalogia:After pressing the key for fifteen times it enters into No.15 interface, you may set the 2/3-time heating and watering, which method is same as the above.
After pressing the key for sixteen times it enters into No.16 interface, press Heat key to choose the piping insulation/ piping circulation.
After pressing the key for seventeen and eighteen times it enters into No.17 and No.18 interface, you may set the heat preservation/circulation time, press Heat key +;Watering key –
After pressing the key for nineteen times it enters into No.19 interface, you may set the water quality, LL is low sensitive water quality, and HH is high sensitive water quality.