推钢加热炉价格-加热炉-圣霖国际【优质服务】

以上是对加热炉的总的基本要求，在加热炉用于油气田具体环节时，需要注意工作介质和工作环境，以及提高生产率、提高加热质量和降低燃料消耗量等各项指标之间的关系，这些因素通常是统一的，但有时则有主有次。

The above is the basic requirement of the total heating furnace， for oil and gas fields in the following aspects: heating furnace， the need to pay attention to the working medium and working environment， and improve the productivity， improve heating quality and reduce fuel consumption relationship between each index weight， these factors are usually unified， but sometimes there are times the lord.

加热炉能快速加热，氧化和脱碳少，适用于加热圆形料坯和钢管。与行星轧机相配合，可用来加热连铸板坯；也可对某些钢材进行局部加热。缺点是单位炉长的生产能力低，推钢加热炉价格，炉子热效率较低。

The heating furnace can be heated quickly， with less oxidation and decarburization， and is suitable for heating round billets and steel pipes. It can be used for heating continuous casting slab and heating some steel products. The drawback is that the production capacity of unit furnace length is low and furnace thermal efficiency is low.

焚烧时司炉工不能面对火嘴及看火窗，避免回火伤人。如火焰平息，应当即封闭燃料阀，炉膛内需用蒸汽吹扫后，方能重新焚烧。进入炉内维修时，应处置进入设备内作业手续。防爆门不得用其它物件堵死，避免失掉防爆效果。引瓦斯时要注意脱净存水及凝缩油，并在安全地址排空15分钟以上，经化验剖析含氧量小于1%，方可投用焚烧。瓦斯进炉**定要通过阻火器。

When burning， the stoker can not face the fire mouth and look at the fire windows， so as to avoid backfire and injure people. If the flame is subsided， the fuel valve should be closed immediately，加热炉， and the furnace needs to be cleaned by steam before it can be re burned. When entering the furnace maintenance， the operation procedures for entering the equipment should be  of. The explosion-proof door should not be blocked by other objects，推钢加热炉报价， so as to avoid the explosion proof effect. Attention should be paid to the removal of water and condensate when gas diversion，推钢加热炉采购， and more than 15 minutes at a safe address， after analysis of laboratory oxygen content less than 1%， can be put into incineration. Gas must be passed through the flame arrester before entering the furnace.