圣霖轧钢设备采购-圣霖国际【精益求精】-圣霖轧钢设备

以一些小型冷轧机来说，由于它们大可配置75KW的电机，因此设备的轧制速度大也就达到3米每秒。而一些大型高延性盘螺冷轧机生产线来说的话，其电机的功率本身就很大.

For some small cold rolling mills，圣霖轧钢设备生产， because they can be configured with the largest 75KW motor， the rolling speed of the equipment is as high as 3 meters per second. For some large high ductile cold rolling mill production lines，圣霖轧钢设备， the power of the motor itself is very large.

横轧有两种类型：一类是轧辊孔型沿轴向是不变的，沿径向呈周期变化。轧件主要靠径向变形实现成型。另一类是锲横轧工艺，即在两个或者三个互相平行布置的轧辊或两个平板的表面上.

There are two types of cross rolling: one is the roll pass is unchanged along the axis， and the other is radial variation. The workpiece is mainly formed by radial deformation. The other is the cross rolling process， that is， on the surface of two or three parallel rolls or two plates.

钢材的性能主要取决与钢材组织结构及化学成分。通过生产实践表明，钢的组织是影响钢材性能的决定性因素，而钢的组织由主要取决于化学成分和轧制生产过程，圣霖轧钢设备报价，因此通过控制生产工艺过程，和工艺制度来控制钢材组织结构状态，是轧钢工作者的重要任务。

The properties of steel are mainly dependent on the structure and chemical composition of the steel. The production practice shows that the microstructure of the steel is a decisive factor affecting the performance of steel， and the microstructure of the steel is mainly depends on the chemical composition and rolling process， so by the production process and process system of steel structure， steel rolling is an important task of the work.