立体车库边梁全自动冷弯成型机辊压设备 边梁生产线

潍坊奥腾冷弯机械有限公司

边梁冷弯成型设备设计原则：
此设计本着使用可靠，便于维护，零部件较大限度的标准化、通用化、使用寿命正常化，投资省，关键部位高标准，辅助部位保使用，轧辊易互换、基准统一化的原则。
边梁冷弯成型设备设计依据：
根据需方提供要求，整机自动流水作业，产品样件满足提供图纸要求，参照冷弯型钢的国家标准GB6723—86《通用冷开口型钢尺寸外形，变量及允许偏差》、GB6724—86《冷弯波型钢板》、GB6726—86《货运汽车冷弯型钢尺寸、外形、变量及允许偏差》。
Design principle of side beam cold forming equipment:


This design is based on the principles of reliable use, easy maintenance, maximum standardization, generalization of parts, normalization of service life, low investment, high standard of key parts, maintenance of auxiliary parts, easy exchange of rolls, and standardization of reference.


The design basis of the side beam cold bending forming equipment:


According to the requirements of the demand side, the whole machine will flow automatically, and the product samples will meet the requirements of the drawings, and refer to the national standard GB6723-86 of the national standard for cold-formed section steel (GB6723-86). Variable and allowable deviation > GB6724-86 < Cold-formed Steel Plate > GB6726-86 < size, shape, variable and allowable deviation of Cold formed Steel for Freight cars.

改进型气动冲床，工作效率更高，工况产品更稳定，大大降低了设备运行成本。

整套设备的外观采用全新的生产工艺，采用下白上篮的颜色搭配，视觉效果更加美好且便于维护保养

立体车库边梁全自动冷弯成型机校平机构采用五加四加重滚压结构，确保原料应力减少分布均匀，使成品更加**。