吸盘/聚氨酯
VG.MF80P 聚氨酯防滑花纹扁吸盘
? 是冲压过程中处理润滑金属板的理想选择
? 增加润滑表面摩擦的特殊胎面花纹
? 用于在紧固过程中获得更大稳定性的硫化接头,真空泵,吸盘可以承受高剪切力
' 技术数据
材料 PU40
在不同真空度下与表面垂直的提升力
-20 kPa 80
-60 kPa 188
-90 kPa 238
在不同真空度 下与表面平行的提升力
-20 kPa 93
-60 kPa 190
-90 kPa 240
体积 31[cm2]
zui小曲线半径79[mm]
吸盘质量
| 技术特征
材料 聚氨酯PU40肖氏硬度
颜色红色
硬度40 Shore
温度范围+10++45 °C
双钳口自动校准平行i气动夹具(SGP-S系列)
?双动作。
?反冲调整系统。
?小尺寸高i性能。
?紧固的构造使其非常适合重型作业的运用,使用寿命长,真空泵生产厂家,免维护。
?不同的紧固和输送选项。
?随时用于 PRO-SN…HS (1) 可编程磁性传感器。
?食物级润滑油FDA-H1。
Double acting.? Backlash adjusting system.? High performance in small dimensions.? The rugged construction lends itself to heavy duty applicationsfor a trouble free long life without maintenance.
Various fastening and air feeding options.? Ready for PRO-SN …HS (1) programmable magnetic sensor.? Food grade grease FDA-H1.
传感器
磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此,大量的磁性材料和强烈的磁场可能会造成传感问题。
The operating position is detected by proximity magnetic sensors
(optional) through a magnet p1aced on the piston.
Therefore, avoid using the gripper in the vicinity of intense
magnetic ffelds or near a large mass of ferromagnetic material
as this may cause detection errors.