产品规格: | 全系列型号 | 产品数量: | 1000.00 个 |
---|---|---|---|
包装说明: | 原装进口,特价销售 | 价格说明: | 不限 |
查看人数: | 507 人 | 本页链接: | https://info.b2b168.com/s168-80399031.html |
上海贵傲电子科技有限公司专业代理销售 英国AESSEAL密封,AESSEAL机械密封,AESSEAL轴承保护器,AESSEAL保护器
如有需求,欢迎来电垂询 陈小姐
The CCS? is a tandem cartridge seal where the inboard seal is designed to seal up to 82 bar (1200 psi), and an outboard seal that acts as a low pressure tandem seal.
AESSEAL? has unique patented hydrostatic and hydrodynamic Dry Gas Compressor seal technology, offering robust protection for the sealing surfaces during start-up, shutdown, slow roll and upset conditions.
High quality compressor dry gas seal support systems engineered to customer requirements for all seal configurations and applications
The STS mechanical seal has been developed in conjunction with a major oil refinery to replace existing carbon ring seals normally fitted to steam turbines.
Non-contacting, gas lift dual cartridge seal primarily designed for pumps (ANSI/DIN) providing practically zero process emissions in service.
An external seal with non-metallic components in contact with the media being sealed.
An external seal with metallic components in contact with the media being sealed.
The SSAI? is a short internal balanced mechanical seal for use with the AESSEAL? SO5 seat.
The MagTecta? range includes two sets of seal faces. These products, in the opinion of AESSEAL?, are the world’s first modular dual face bearing protectors, offering double the protection of a conventional single seal face design.
The MagTecta-OM? is a face seal that prevents oil mist pollution and has been applied to thousands of pieces of equipment in the hydrocarbon processing industry.
Advanced non-contacting labyrinth seal with integral shut-off valve and accessories for KSB CPK pumps.
The LabTecta-OAP? is specifically designed for use in extreme environments and applications where contamination may completely cover the seal /equipment.
The LabTecta-PB? utilizes a unique two-piece stator design that provides a self-aligning joint that allows the seal to align both to the bearing block and to the shaft.
The only radially divided bearing protector available with rotor / stator static sealing technology as standard. The LabTecta-RDS? is available in several configurations including flange mounted, axial movement and internal air-purge, giving even
The LabTecta-SS? is available in full stainless steel construction, giving even greater flexibility in more chemically demanding environments.
Process steam turbines present a unique challenge for bearing protection. As the carbon rings containing the steam wear, high temperature / high velocity steam travels down the shaft directly at the bearing seal.
Advanced non-contacting labyrinth seal with integral shut-off valve and accessories for Warman pumps.
The LabTecta?M is specifically designed for use on electric motors.
Advanced cost effective labyrinth seal, specifically designed for top-entry applications.
A cost effective bearing protection upgrade solution, which is non repairable.
Engineered Bearing Protection for use with tilting pad bearings.
Eliminate over 50% of bearing failures with the LabTecta? IP66 certified bearing protector: a true non-contacting labyrinth design with a shut-off design that really works.
The LabTecta-AX? design uses a unique sliding rotor that allows the seal to absorb axial movement internally.
The LabTecta-IAP? design is ideal for applications where it is necessary to retain product, gases or exhaust within an enclosure. Common applications are fans, screw conveyors and other powder handling equipment.
The SCMS Mixer seal is specifically designed for use on a broad range of mixers, agitators and reactor applications.
A short externally mounted cartridge seal, with flush ports and self-aligning faces.
The SEA2? and SEH1? range of cartridge single mechanical seals is specifically designed for the chemical industry. This Exotic Alloy range, offered in standard and ANSI+ configurations, is available in solid Alloy 20 and Alloy 276 materials.
Modular range of stationary cartridge mechanical seals for general applications in all industry sectors.
A single cartridge stationary seal with integral Plan 23. Coupled with a helicoil cooler, the seal provides the most efficient sealing solution for this piping arrangement.
The TPOC? seal range is specifically designed for applications which benefit from the use of unbalanced seal face technology.
The UHDDS? – is a double cartridge seal particularly applicable for medium to heavy duty slurry sealing applications.
This seal employs standard, modular, inventoried AESSEAL--? components, with a seal gland, which retains fluid when the screen is emptied. This avoids dry running of the tungsten carbide seal faces on equipment start-up.
The ISOS? (inflatable shut-off seal) is fitted between the pump and and radially-divided seal, to form a separate seal when required, allowing the quick and easy removal of the mechanical seal.
The LSEAL? is designed to suit the Flowserve Polychem 'L' Series, Group I and Group II non-metallic process pumps.
Mixer, agitator and reactor applications vary from simple blending to solid dissolution to the more exacting standards of suspension, gas dispersion or containing/promoting chemical reactions.
The AESSEAL Progressing Cavity Pump mechanical seal (PCPS?) has been developed to incorporate proven modular designs from our highly-acclaimed range of single and double mechanical seals.
The RDS? eliminates the need to remove or strip equipment for seal replacement. The unique design makes it the quickest to install two part seal currently available in the market place.
The RDSF has been developed after extensive research and customer feedback to increase the ease that the seal can be fitted correctly – first time.
The DSWIB? (Mixmaster II) is a double mixer seal with integral bearing and concentric face design to reduce the seal's overall length. The seal is offered with the following features:
Features:
The AESSEAL ESM (external seal for mixers) is a unit external seal designed for ease of installation as the seal faces are clipped together and dispatched assembled in a leak-free state.
The FGDSS? & the FGDSS-N? (Flue Gas Desulphurization Single Slurry) single mechanical seal is designed to seal Flue Gas Desuphutization (FGD) and general slurry applications.
The FI-DSNM-R? is designed to suit Richter (ITT-Goulds) PCK and SCK process pumps. This unique cartridge design eliminates the OEM ceramic sleeve.
The FIDC seal is the next generation of high performance sealing solutions offering increased barrier fluid flow for improved reliability.
The HDSS and HDDSS heavy duty slurry seals are designed for the arduous environment of the mining industry. The robust seals are built to withstand levels of pump vibration with large internal clearances accommodating levels of movement.
The IADC? Screen seal design is a double seal available in a wide range of seal face and elastomer applications to suit individual process requirements. This seal is used on screens and knotters.
The CMAX? is a single cartridge seal that allows for axial movement.
Cartridge seal designed to replace two-part component seals and conventional packing arrangements.
The AESSEAL CSS?/CSSN? range of cartridge mechanical seals has been designed as high-performance sealing solutions for general applications.
The CSWIB? (Mixmaster I) is a single cartridge mechanical seal, with balanced seal faces and an integral (steady) bearing.
The CVSD? and CVSD-R? mechanical seals are ideal for slurry applications. The seals are designed around AESSEAL? modular technology...
The DISP? range double stationary mechanical seals provide highly-technical, value-engineered sealing solutions applicable for all industry sectors. The seal incorporates an integral bi-directional flow inducer for effective seal cooling.
The DSNM? is designed to suit the Flowserve Polychem 'S' Series non-metalic process pump.
The CDM?cartridge double mechanical seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.
The CDMSC? is designed specifically for Mixer, Agitator and Reactor applications. Based on the modular technology of the DMSF?, this externally mounted cartridge seal incorporates many design features to help increase seal life.
The AESSEAL CDP?/CDPN? range of cartridge mechanical seals has been designed as high-performance sealing solutions for general applications.
The CDPH? double mechanical seal is designed to meet the arduous requirements of slurry applications. Large ports and increased radial clearances enable the seal to maintain a stable fluid film...
These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.
Stationary seal face technology to accommodate angular shaft to housing misalignment. Bi-directional flow induction (patent pending) for effective barrier heat removal
The cartridge lip seal is specifically designed for dry running applications where barrier fluid is not permitted to enter the process media.
The BDFI?/BDFC? (Bellows Double Flow Induction/Convection) is an innovative modular hybrid design, created using the inboard design of a BQFD? and the outboard design of a DMSF?.
The BDTP? (Bellows Double Tandem Pumping) is a highly-innovative hybrid design, modular to the BDFI?. The seal's directed barrier fluid flow path achieves optimum heat removal at both sets of seal faces.
The BQFD? (Bellows Quench Flush Drain) range of single cartridge mechanical seals uses many of the same modular parts as a BSIV?
The BSAI? range is available in a wide range of seal face and elastomer combinations, together with self-aligning, DIN, CURC?, T, L shaped or boot mounted stationaries.
The BSFG? (Bellows Single Full Graphite) cartridge seal is specifically designed to eliminate the costly and often long lead-time issues of exotic elastomer compounds.
The BSIV? range of single cartridge mechanical seals has been designed as a value-for-money, high-performance sealing solution for general applications.
The CDFI? / CDFC? bridges the product range gap between the CDSA? and DMSF? differentiating itself in two areas.
The AESSEAL? API Type A, B and C single-seal range offers the user an unprecedented range of API engineered sealing solutions to suit all application requirements.
This modular seal is ideal for the containment of hazardous process fluids.
The CFFC? and HPVD? are dual seals. (The CFC? and HPVS? are the single versions.)
These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.
The CSM? cartridge single seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.
The AESSEAL CURC?, CRCO? and CURE? mechanical seals are part of a range of seals specifically designed to optimize the use of Silicon Carbide.
The DMSF? (Double Monolithic Stationary Flow) range of double mechanical seals has been designed as a high-performance sealing solution for arduous applications.
A single cartridge stationary seal with modular monolithic seal faces.