产品规格: | 不限 | 产品数量: | 9999.00 台 |
---|---|---|---|
包装说明: | 不限 | 价格说明: | 不限 |
查看人数: | 167 人 | 本页链接: | https://info.b2b168.com/s168-89841497.html |
temperatures. SHOCK HAZARD BURN HAZARD4 ControlLogix Controller and Memory Board Publication 1756-IN101L-EN-P - June 2008 Explosion Hazards Preventing Electrostatic Discharge Removing Module While Under Power (RIUP) WARNING An electrical arc can occur if you: ? insert or remove the CompactFlash card. ? insert or remove the controller while backplane power is on. ? connect or disconnect the battery. ? connect or disconnect the serial cable with power applied to this module or the serial device on the other end of the cable. This could cause an explosion in hazardous location installations. Make sure that power is removed or the area is nonhazardous before proceeding ATTENTION This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment. ? Touch a grounded object to discharge potential static. ? Wear an approved grounding wriststrap. ? Do not touch connectors or pins on component boards. ? Do not touch circuit components inside the equipment. ? Use a static-safe workstation, if available. ? Store the equipment in appropriate static-safe packaging when not in use. WARNING When you insert or remove the module while backplane power is on, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding. Repeated electrical arcing causes excessive wear to contacts on both the module and its mating connector. Worn contacts may create electrical resistance that can affect module operation.
厦门欧晟宇自动化科技有限公司
联系人:费深
Q
手机:
电话:0592-6257271
地址:厦门集美区杏林湾路526号501室
优势品牌AB(罗克韦尔),ABB,西门子,TRICONEX,
力士乐,霍尼韦尔,GE FANUC(法那科),YASKAWA(安川
),FOXBORO(福克斯波罗)有需要赶紧可以联系,不容**
Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at ) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited. Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
厦门欧晟宇自动化科技有限公司
联系人:费深
Q
手机:
电话:0592-6257271
地址:厦门集美区杏林湾路526号501室
优势品牌AB(罗克韦尔),ABB,西门子,TRICONEX,
力士乐,霍尼韦尔,GE FANUC(法那科),YASKAWA(安川
),FOXBORO(福克斯波罗)有需要赶紧可以联系,不容**
相关分类: 现场总线 特殊/专业电源 人机界面 机器视觉系统 混频器 电器元件 触控产品 变频器 保护器 EPS电源 DCS/PLC系统