公司介绍
枣强县荣驰玻璃钢有限公司拥有一支由专业技术人员组成的集科研开发于一体的队伍,专业生产销售耐腐蚀、玻璃钢除雾器系列产品。我公司位于河北省衡水市枣强县,交通十分发达,拥有多条高速公路和国道、省道,县乡公路发达,交通便利,运输方便,地理位置优越。我公司坚持“诚信、求实、创新”的服务宗旨,坚持以技术为依托、以产品质量为生命,以诚实服务为经营理念。
联系电话: Q
平凉脱硫塔除雾器材料要求
1、除雾器管道、法兰采用玻璃钢FRP,喷嘴采用PP-R材质。
2、垫圈采用EPDM。
3、所有法兰采用HG20592标准。
4、除雾器材料性能完全满足使用工况要求。
客户案例:
北京市的张女士在2017年1月份从我们公司一批玻璃钢材质的除雾器。
客户评价:
我对玻璃钢除雾器并不是太了解,选购的时候也比较迷茫,贵公司的销售经理告诉我如何辨别玻璃钢除雾器质量的好坏。贵公司给我寄了一个样品,质量完全符合行业规格,然后我就从贵公司订购了产品。
销售电话: Q
The working principle of FRP mist eliminator:
The blade shape of sinusoidal surface is used for defrosting of vertical airflow.
When smoke and droplets flow in the blades, they will collide with the wall of the blades constantly, and the kinetic energy will disappear.
The droplets that lose speed are separated from the flue gas and remain on the surface of the blade, and then fall into the slurry tank.
The FRP mist eliminator must work below critical gas velocity. Otherwise, the fog drops are carried and failed.
(1) fog removal efficiency: under normal operating conditions, the droplet concentration in the flue gas of the FRP mist eliminator is less than 75mg/Nm3.
(2) pressure drop: without considering the interference before and after the mist eliminator, the pressure drop of the whole FRP mist eliminator system is less than 120Pa under the 99.99% flue gas load.
(3) high temperature resistance: 80--95 C.
(4) withstand voltage: ensure that the blade can work normally when the flushing water pressure is 0.3MPa.
(5) flushing nozzle: full cone nozzle, flushing water angle of 90 - 120 degrees, spraying solid cone, can ensure that all blades are covered. (the water consumption of a large gas load is designed, taking into account the requirements of the water balance of the system. If the gas load is reduced, the water consumption can be reduced by half by increasing the interval of the flushing interval).
Order telephone: Q